There is no “one size fits all” when it comes to covers, so we ask that you fill out the form below as completely and accurately as you can. With good measurements we can make a cover to fit any brand fabric hoop building.

If your building doesn’t have the standard conestoga type cover that ours have, you will still be able to fill our the important parts of the worksheet. We can make you a cover.

The length and width and the “up and over” of your building are the most critical measurements. We also need all the other little details like your fabric tensioning system. “Do you want lace with that?”

    About Your Cover

    Where are your cover tie down ratchets?



    Need more help?

    Measure the open or doored end of your building from rafter foot to rafter foot.

    How to measure your hoop barn width.


    Need more details?

    Measure from the outside down the side of your building to the outside of the other end at the base of the rafters.

    How to measure the actual width of your hoop building cover



    Need some help with this one?

    Measure from the bottom of the pipe pocket (on the cover), up and over to the bottom of the pipe pocket on the other side.

    We realize sometimes you just don't have a cover to measure. In that case, provide your measurement from rafter foot (bottom of pipe), up and over, to rafter foot.

    If the building is large, you may have to throw a rope over and mark and measure the rope.

    How to measure the actual width of your hoop building cover

    How did you measure for your cover?*


    Need some help with this one?

    Cover drop is for Outside Ratchet buildings only and ONLY if you didn't give us pocket to pocket measurements. How far down your wall do you want your cover to drop? It is the distance between the top of your stem wall and the bottom of your pipe pocket. 8" is typical for each side.

    How to measure cover drop in a hoop building

    Need some info here?

    We assume this is one side and the other side is the same. We need the measurement of the fabric below the pipe pocket, in Inches please

    Both styles of buildings MAY have a flap of fabric below the pipe pocket on the sides. We call this a ground flap, measure it if it exists. Typical is 18"per side.




    Click for help with these two

    Measure the cover overhang on both ends. They should be the same. If they are not, give us the average or tell us why.

    How to measure your Conestoga overhang on a hoop barn

    Need some direction?

    Measure the distance between your rafters from center to center. If this measurement differs in your building, we'll need to know that too.

    Hoop barn with no cover installed



    Do you need more info on end-to-end tensioning?

    End-to-end (Lateral) Tensioning

    This is how your cover attaches to your outside rafters. We're sold on PVC pipe and ratchets for ease of installation and maintenance. We DO NOT offer grommets and rope, the best we can do is D-rings and webbing and we DO NOT offer a warranty with that method.

    Two different options of end to end tensioning for a hoop barn cover


    We use 30" for ratchet spacing for normal conditions. D-rings and lacing are typically at 24"


    Replacement Hardware?













    Your Fabric Cover Choices

    We have many replacement cover material options including fire resistant. We highly recomend white as a color choice because a couple decades of experience has taught us that it has the longest useful life. However, there is no upcharge for colors that are on our color charts. If you want long life but want a touch of color, we can also do colored 6' or 12' stripes at the ends. Ask us for guidance if needed.

    Our Standard - 15 Year cover is 12 ounce double woven 23 mil thick material designed to be rip proof. Both sides of the fabric have a 2.5 mil polyethylene coating for improved abrasion resistance and wearability. The outside receives yet another top coat for UV resistance that also defeats mold and mildew. This is a good cover choice for many buildings.

    The Elite - 20 year cover is 13.8 ounce approx 26 mil thick and has a better yet top coating than our standard fabric. This improves the UV resistance as well as making the cover smoother and more slippery. This is a great advantage in heavy snow areas as the snow slides right off. For a very few dollars more, you get a better performing, longer lasting cover.

    We also offer various fire resistant fabrics, keder panels and other options. If one of these is selected we will try to contact you personally to assist you.



    Please call 888-497-1088 or email us for assistance.


    Elite Cover/Trim Colors

    The lighter the color, the longer it lasts. We recommend white. This cover has not been available long enough for us to field test totally but we believe in the technology.

    Colors available in 20 year HDPE fabric



    Standard Cover/Trim Colors

    We offer a few more colors in our Standard 15 year line but we still recommend white.

    Standard colors offered for replacement hoop building covers





    Two different options of end to end tensioning for a hoop barn cover

    Your replacement hoop building cover will arrive on a truck, looking somewhat like this one. If you would like to pick up your new cover, let us know and we will try to accommodate you at the plant nearest your location.

    About You



    Billing Address*





    We appreciate knowing everything about your cover needs so please use the message box to tell us about additional details. It would be most helpful if you send us pictures of your hoop too. You may upload these here:




    Thank You! We appreciate your interest in our hoop building covers and we'll get back to you with your free estimate as soon as we can!


    Hoop Barn
    Infinite Earth, LLC
    Marion, South Dakota, USA 57043
    888-497-1088